Visit our Business Solutions website >>

XYZprinting da Vinci 1.0

XYZprinting da Vinci 1.0
alaScore 78

46 reviews

Nov, 2024

alaTest has collected and analyzed 46 reviews of XYZprinting da Vinci 1.0. The average rating for this product is 3.4/5, compared to an average rating of 4.0/5 for other products in the same category for all reviews. Reviewers are impressed by the size and performance. The durability and price also get good reviews, but some have doubts about the print quality.

usability, price, durability, performance, size

print quality

We analyzed user and expert ratings, product age and more factors. Compared to other products in the same category the XYZprinting da Vinci 1.0 is awarded an overall alaScore™ of 78/100 = Good quality.

Review analysis

(Based on 46 reviews)

User Reviews  

Review Ratings

  (35% of reviews)
Show all 5 star reviews   (20% of reviews)
Show all 4 star reviews   (13% of reviews)
Show all 3 star reviews   (9% of reviews)
Show all 2 star reviews   (24% of reviews)
Show all 1 star reviews

Features

usability
  Show positive (70%)Show negative (30%)(Show all)
price
  Show positive (71%)Show negative (29%)(Show all)
durability
  Show positive (74%)Show negative (26%)(Show all)
performance
  Show positive (68%)Show negative (32%)(Show all)
size
  Show positive (65%)Show negative (35%)(Show all)
reliability
  Show positive (60%)Show negative (40%)(Show all)
design
  Show positive (75%)Show negative (25%)(Show all)
noise
  Show positive (83%)Show negative (17%)(Show all)
print quality
  Show positive (33%)Show negative (67%)(Show all)
paper handling
  Show positive (100%)None yet(Show all)
Show more features

Showing 46 review(s)

Expert Reviews User Reviews

Disclaimer:

Below is a list of reviews for this or similar products. If you think this grouping is wrong please click here to flag.
Read more on our FAQ’s page.
Showing 1 - 10 of 46 Show Reviews: in English

Consumer review (newegg.com)

BUY AT YOUR OWN RISK!

 

Good price of entry level

Customer service is HORRIBLE! The printer has been down for 3 months and I have been waiting on a X motor wiring harness with the same reply from customer service "The parts department will contact you with a tracking number". 3 months later and no...

Jun, 2015
Read the full review

Consumer review (newegg.com)

Great for the price

 

The da Vinci is a fabulous value for the dollar. However, be aware that many/most of the machines are less than optimally adjusted upon delivery. Before buying, check out some of the online videos on people adjusting their machine, and make sure the...

Enclosed build area ; Beginner friendly ; Hackable ; Large user community

Proprietary ; Needs adjustments before it will print well

Jun, 2015
Read the full review

Consumer review (newegg.com)

Good card, Great value, better than Xfired 270Xs.

 

The glass bed is not heat tempered. It is just standard photo frame glass on a heating circuit. Mine started chipping after a week. Replacement heat beds are $60 and constantly out of stock. You should take extra time to let the entire thing return to...

The best thing about this printer, no assembly required! Remove a few supports and packing material, and the thing is ready to go. Drop in a cartridge, feed it through the hole and into the extruder body, tell it to load filament, and you are literally...

This printer is no for advanced users who want full control. The software is limited to basic rotation and moving of the model, some rudimentary scaling, and preset variations in settings. You won't have the ability to fully adjust settings to you...

Jun, 2015
Read the full review

Consumer review (newegg.com)

Decent entry-level printer

 

The glass bed is not heat tempered. It is just standard photo frame glass on a heating circuit. Mine started chipping after a week. Replacement heat beds are $60 and constantly out of stock. You should take extra time to let the entire thing return to...

The best thing about this printer, no assembly required! Remove a few supports and packing material, and the thing is ready to go. Drop in a cartridge, feed it through the hole and into the extruder body, tell it to load filament, and you are literally...

This printer is no for advanced users who want full control. The software is limited to basic rotation and moving of the model, some rudimentary scaling, and preset variations in settings. You won't have the ability to fully adjust settings to you...

Jun, 2015
Read the full review

Consumer review (newegg.com)

Impressive! Impressionnant!

 

Livraison ultra rapide. Seulement 2 jours ; Imprimante étonnante vu le nombre de mauvais commentaires. Ils ont probablement corrigé les problèmes. Très silencieuse comparée à un Cube3. Prix abordable ; Very fast delivery. Only 2 days! Impressive...

Mes cercles n'étaient pas parfait. J'ai du ajuster la tension des courroies. Le plateau chauffant est très bien mais on doit attendre qu'il soit chaud pour commencer l'impression et c'est assez long (3-4 minutes) ; Circles were not round at first. I...

May, 2015
Read the full review

Consumer review (newegg.com)

Hardware Gets 4 Stars

 

Worked out of the box after fixing a belt that had jumped a tooth on a drive cog for the Y axis. Half of the purchased filament cartridges have jammed from the filament tangling inside. For routine issues (and there are many with consumer-grade 3d...

Good build quality ; Great price ; Well packaged ; Good third party user support

Proprietary filament ; Filament jams in cartridge ; Proprietary desktop slicing and control software ; Proprietary printer firmware ; Poor support

May, 2015
Read the full review

Consumer review (newegg.com)

Amazing Printer for the Money

 

These are great printers if you get a cartridge resetter device and reset your empty cartridge. Then you can use bulk 2.2lb reels of filament and save a fortune over the 600g cartridges that often show empty while still containing filament.

Price point, Build size, A huge community of devoted owners who provide a wealth of knowledge

Cartridge filiament, an easily damaged thermistor on the side of the extruder head under a glob of silicone (LEAVE IT ALONE) ; Also don`t update the printer software or the provided XYZ software. You will lose your ability to use the cartridge resetter...

Apr, 2015
Read the full review

Consumer review (newegg.com)

Solid starter 3D printer

 

I have wanted to try 3D printing for some time, and the price point for this one ($350) was impossible to pass up. Got a good quality Star Vase demo print directly out of the box. Good looking printer, nice desk appeal...doesn't look like an erector...

Out-of-the-box printing ; Good quality at this price point ; Hackable

Closed/proprietary filament cartridges and software

Apr, 2015
Read the full review

Consumer review (newegg.com)

Works Great!

 

Would recommend for anyone wanting to get into 3D printing at a very reasonable price.

The printer worked right out of the box and needed no adjustments. I believe this was due to the excellent packaging ; It's perfect for prototyping

The manual provided and online are pretty poor ; You have to buy their filament cartridges

Apr, 2015
Read the full review

Consumer review (newegg.com)

Broken out of the box ...

 

I would not recommend buy anything from this company.

It was cheap

It is broken out of the box with error 0031. Support; broken English, support phone line quality terrible and disconnects and they want to ship it back with your own cost the unit, which never worked out of the box. I would not recommend buy anything...

Apr, 2015
Read the full review
1
2
3
4
5

Price comparison for XYZprinting da Vinci 1.0